Metz Connect Analog Transmitter 110731

Manufacturer: Metz Connect
Designation: Analog Transmitter KMAi-F8
Type: 110731
Bidirectional: no
Galvanic Isolation: none
Nominal Current Consumption: 19 mA

The analog transmitter is used for manual setpoint adjustment, e.g., for mixing dampers, valve positions, temperature values, etc. The module can be controlled in two operating modes, which are set via the three-position switch (ON, OFF, AUTO) on the front panel. The switch position is fed back through the external control contact terminals B1 and B2.

Switch Position ON: The setpoint can be adjusted using the potentiometer on the front panel. The output signal of 0 to 20 mA is available at terminal Y. The current flow at input YR is not interrupted in the ON/OFF switch position.

Switch Position AUTO: The input current (YR) is transmitted to the setpoint output Y with a tolerance of ± 5% (scale end value).

Connection with spring-loaded terminals (Push-In), setpoint transmitter, manual control level with feedback, LED brightness proportional to the setpoint.
EAN: 4250184123231.