The Aquacomputer High Flow LT flow sensor can be easily integrated into the cooling circuit and allows for continuous flow measurement. The flow measurement is carried out via a rotor/impeller driven by the flowing coolant. The rotational speed is captured contactlessly through a magnetic measurement system. An optimally calibrated bearing play for each sensor achieves minimal operating noise. The sensor provides reliable measurements from approximately 35 l/h to 1000 l/h, making it ideal for most water cooling systems. Its symmetrical design allows the sensor to be integrated into the system without regard to flow direction. Additionally, the sensor can be operated in any mounting position. The very low flow resistance meets the demands of high flow systems. The connection threads are made in G1/4, allowing operation with a wide range of hose systems. Two suitable screws for securing the sensor are included in the delivery. Technical specifications: Dimensions: approx. 51 x 42 x 30 mm, connection thread G 1/4. Delivery includes: one flow sensor, one connection cable, two screws, and spacer rings. Important: A device with a flow sensor input is required to evaluate the flow signal; this is not included in the delivery!.